Teradek Bolt Pro 600

Need to send a video signal and flying a Movi or lightweight rig where every gram counts? Look no further – the Teradek Bolt Pro 600 uses a new RF design that extends the transmission range up to 600ft line of sight. The TX also includes 2 RP-SMA connections that can be outfitted with higher gain antennas to provide a more resilient wireless link over longer distances. Best of all, the 600 model includes both an HDMI and 3G-SDI input so you’ll be able to use it just about anywhere.

The new standard receiver for the Bolt Pro 600 is half the size and weight of the previous long range receiver and offers both HDMI and 3G-SDI outputs. The new fan-less chassis design also includes a built-in LCD for checking your wireless link status and pairing additional Bolt Pro receivers in the field. As an added benefi t, 5 RP-SMA connections are included so you can augment your system with high gain antennas for increased transmission resiliency.

The Bolt Pro 600 supports the GRAB video ingest engine, which turns the Bolt Pro receiver into the world’s first wireless video capture card. With both 3G-SDI and USB 3.0 outputs, users can ingest Bolt’s uncompressed 10bit RGB video feed directly into a DIT Cart, NLE computer or live production switcher with no added delay or further conversion required.

We also have the Bolt Pro 300. Need wider coverage? Get the Bolt 1000!

Teradek Bolt Pro 600 Specs

Transmitter:
Video resolution: 1080p60/59.94/50/30/29.97/25/24/23.98, 1080psf30/29.97/25/24/23.98, 1080i60/59.94/50, 720p60/59.94/50, 480p59.94/576p50 (via HDMI ports only), 480i(NTSC)/576i(PAL)
Colour sampling: Depends on the input/output types and RX settings; SDI 10-bit with no format conversion and FPGA v.1.1.0 or later, 8-bit colours for the rest
Inputs: 1 x 75 Ohm BNC, 1 x Type A receptacle HDMI
Outputs: 1 x 75 Ohm BNC(Loop-out)
Audio format: 48kHz 24-bit PCM
Frequencies: Non-DFS 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz, 5.19 ~ 5.23 GHz, DFS 5.27 ~ 5.55 GHz and 5.67 GHz, 5.27 ~ 5.67 GHz
RF power: 19dbm EIRP(with two 2dbi antennas)
Range: Up to 600′ line of sight
Power input: 2-pin LEMO 7-28 VDC
Power consumption: 7.8 W
Operating temperature: 0 – 50 deg °C
Dimensions: 4.3″ x 2.6″ x 1.1″(109.2 x 66.0 x 26.7mm)
Weight: 9.9oz(282g)

Receiver:
Video resolution: 1080p60/59.94/50/30/29.97/25/24/23.98, 1080psf30/29.97/25/24/23.98, 1080i60/59.94/50, 720p60/59.94/50, 480p59.94/576p50 (via HDMI ports only), 480i(NTSC)/576i(PAL)
Colour sampling: Depends on the input/output types and RX settings; SDI 10-bit with no format conversion and FPGA v.1.1.0 or later, 8-bit colours for the rest
Inputs: n/a
Outputs: 1 x USB 3.0 micro B receptacle, 1 x 75 Ohm BNC, 1 x Type A receptacle HDMI
Audio format: 24-bit 48kHz PCM
Frequencies: Non-DFS 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz, 5.19 ~ 5.23 GHz, DFS 5.27 ~ 5.55 GHz and 5.67 GHz, 5.27 ~ 5.67 GHz
RF power: 17dbm EIRP(with one 2dbi TX antenna)
Range: Up to 300′ line of sight
Power input: 2-pin LEMO 7-28 VDC
Power consumption: 8.5 W
Operating temperature: 0 – 50 deg °C
Dimensions: 5.8” x 3.5” x 1.0”(147.3 x 88.5 x 25 mm)
Weight: 13.3oz(376g)