- Bolt Pro 300 Transmitter
- 2x Bolt Pro 300 Receiver
- 4x Dtap – 2 Pin Lemo Power Cable, 2x Mains Unit – 2 Pin Lemo
- 2x Curly BNC Cable, 2x 0.5m ‘Pinky Slinky’ BNC, 1x 1.5m BNC Cable
- 1x 0.5m HDMI Cable, 1x 1m HDMI Cable
Teradek Bolt Pro 300 2RX
With the ability to transmit uncompressed 1080p video wirelessly over 300 feet, the Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set is no stranger to film sets the world around. When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary. Unnoticeable latency is important for directors and focus pullers to see the action at the same time the camera does.
Included in this set are a Teradek Bolt 300 transmitter and receiver both equipped with 3G-SDI ports. The units in this kit are compact and feature internal antennas so they can fit on your camera rig, your DIT cart, or director’s monitor rig with ease.
The Teradek Bolt 300 3G-SDI Wireless Video Transmitter accepts SDI signals and can transmit them to a Bolt 300 Receiver up to 300 feet away in optimal line-of-sight situations. The Bolt system supports uncompressed video resolutions up to 1080p at 60 fps with 4:2:2 chroma subsampling. Because the Bolt system uses the 5 GHz wavelength, it does not require FCC licensing. Included with this transmitter is a shoe adapter to mount the unit to a camera’s standard accessory shoe and a D-tap to LEMO power cable so you can power the unit with an onboard battery with a D-tap output. In terms of the receiver, aside from being able to output video via 3G-SDI, the USB 3.0 port can stream the uncompressed video directly to a PC for recording with the GRAB Engine. Included with this transmitter is a 1/4″-20 thumb screw to mount the unit to a video rig and a 1/2″-20 adapter to secure the unit to a small light stand. Our kit comes with two receivers as standard.
Up to 300ft