Easyrig Vario 5 With Flowcine Serene Arm
The Flowcine Serene Arm has very quickly become a must-have item for most Easyrig users, offering an added stabilisation and vibration reduction. The Serene is a two-axis spring arm that attaches to the end of the Easyrig 2, 2.5, 3, 4 or 5 and which corrects motion errors on the vertical axis that comes from walking or running with the rig. It also stabilises side to side errors in the same scenarios by counter pivoting around it’s centre axis. At the same time, you have full use of the Easyrig spring extension that will allow you to go from high to low mode while at the same time, the Serene will take care of the vertical and side to side stabilisation, adding two more stabilisation to your existing system.
The Flowcine Serene Arm can take rigs between 6-20 kg, and you can be easily fine tune the spring tension without the use of a tool.
For the ultimate stability, use the Easyrig Vario 5 and Serene Arm with our Movi Pro or Ronin 2!
Follow us on Instagram to see more of our kit in action.
Serene Arm SpecsMain Features:
Mounts on any Easyrig arm in the 2/2.5/3 and Vario 4/5 series. (For rigs over 16 kg we recommend the Easyrig Standard upper arm and not the Medium +130mm or Long +230mm versions.)
Serene arm allows for a frictionless boom range of 180mm.
Easyrig cord passes through enabling high/low mode shooting.
Two springs cover the payload range of 6-19.5kg.
Totally reactive at both slow and fast walking/running sequences with push/pull forces of 800g to 1200 g depending on the camera load and gimbal total weight.
Allows for further accessories like the Serene Extension arm.
Ships with new Easyrig cord and drilling template that fits all Easyrig 2/2.5/3 and Vario 4/5 support bars.
Dimensions:
Height: 210mm
Width: 405mm
Depth: 68mm
Material: Aluminium, Carbon Steel, Stainless Steel, EPDM rubber
Max Load: 19.5kg / 43lbs
Min load: 6kg / 13lbs